Gas Price Display Q&A
- Please refer to Gas Price LED Display User Manual
- For information on setting of the Gas Price Display, please refer to the following.
- Try to use the remote control to turn on the power.
- Make sure it is plugged adequately, there’s power in the sockets, and the power switch is turned on inside the power switch cabinet.
- Check if there’s any lightning strike or power trip, and if there’s also any other device malfunctioning, and whether the power switch has tripped off (inside the power switch cabinet).
- If the power is stable but cannot operate properly, please report and request for repair service.
- Make sure it is plugged adequately and check whether Gas Price Display has power Check the remote control’s battery (replace a new battery if necessary) If it can not be operated, please report and request for repair service
- Check the remote control’s battery(replace a new one if necessary).
- If still cannot operate, then please report and request repair service.
- If the other oil price displays are working properly, please press the “X” button on your remote control several times, and check if the displays of 98 Gas and Diesel turns on and off repeatedly.
- If the display for Diesel is still off, please report and request for repair service.
- If all the other oil price displays are working correctly, then press the “X” button on your remote control several times, and check if the displays of 98 Gas and Diesel turns on and off repeatedly.
- If the display for 98 Gas is still off, then please report and request repair service.
- Turn the power off and back on with the remote control, if the problem persists, then please report and for request repair service.
- Turn the power off and back on with the remote control, if the problem persists, then please report and request for repair service.
- Please report and request for repair service.
- Press the “OK” button on the remote control and check whether the blinking stops for the testing mode.
- If the problem persists, please report and request for repair service
- Press the yellow button on the 2nd upper row of the remote control, and the decimal point should start blinking, and you can adjust the LED brightness by pressing the up and down arrow keys on the remote control. When you finish the adjustment, please press OK button to complete the adjustment work.
- If the brightness cannot be adjusted, please report and request for repair service.